SBC Reinforced Crane Body
The All-In-One Solution for Crane Bodies
CM Truck Beds is proud to set the standard with an all-in-one solution for crane trucks! Hard workers everywhere can choose from one of our four crane options from Tiger and Auto Crane, as well as a workbench bumper with built-in outriggers and a 24K lb. receiver hitch to complete your crane truck. With 3,200 and 4,000 lb. crane offerings, these cranes expedite your upfits and are trusted by seasoned professionals in the crane body industry. CM Truck Beds delivers proven performance and reliability once again!
Standard Equipment Information
12 Gauge Galvanneal Steel with Spray On Bed Liner
Our SBC Crane Body is built with the most rugged materials to withstand the grind and tear that you will put it through in the field, prolonging the life of your work truck.
T-Handle Compression 3-point latches
Count on CM to keep your valuable tools safe, secure and protected from the elements. Our latches seal tightly, so you never have to worry about them opening in transit or letting in damaging moisture.
Automotive D-bulb weather stripping
Weatherstripping is an important feature of any body. Our doors are sealed with D-bulb weatherstripping to ensure that no moisture gains entry to the interior of our toolboxes.
Multi-panel doors with internal reinforcements
CM Truck Bodies uses multi-piece doors, reinforced to prevent flexing and sagging. Our doors will shut, seal and perform better than any door in the market.
4,000 lbs. of Crane and 16,000 ft-lbs of torque
This feature gives users the ability to mount up to a 4,000 lb capacity crane on our body and still work safely and efficiently out in the field.
Heavy-duty rear tailgate
When you haul materials on our decks, you can rest assured that our tailgates will be tough enough to keep the material inside of the deck. They are rated at over 400 lbs., supporting even the largest operators to gain access into our bodies.
Gas cylinder style door holders
We don’t use simple springs, we use the finest gas shocks on the market today. They provide strength that allows our doors to open smoothly and stay open so you can use your truck body for what its intended for…work!
PAINT
Heavy-Durable Wet Coat Finish
CM Truck Beds coats our service and crane body products with Low VOC Acrylic Polyurethane paint. We cover every crevice and corner, providing long-lasting protection and a best in class finish and shine!
Heavy-Durable Wet Coat Box Interior
After careful preparation we apply both a primer and top coat paint, even in the interior of your toolboxes. This ensures that when your tools shift in transit, they won’t end up with rust and corrosion.
Warranty
4 Year / 48,000 mile warranty
Some companies say they stand behind their products, we put it in writing. We offer the longest warranty for the body, offering a 48-month warranty. We recognize what an investment a service body can be, and we want you to know that were with you today, and four years from now.
Available Options
CTech Toolboxes
We are now offering this cutting-edge storage solution for work truck users seeking maximum durability and functionality. The cabinets feature heavy-duty ball-bearing drawer sliders built to withstand years of heavy use and exposure to the elements.
Tiger Crane 3216E
This compact crane offers 3,200 lbs of lifting power with effortless control using the standard wireless remote, ensuring safety and efficiency on the job. With ultimate compatibility for our SBC crane body, this unit will help you set the standard in any vocation.
Tiger Crane 4016E
With 16.5 feet of reach and maximum load capacity, this crane pairs perfectly with our SBC Crane Body. The standard wireless remote boosts safety and ease of use, giving you the freedom to get the job done. Set the Standard with the best in performance and reliability!
Auto Crane EHC-32
The 3,200 lb Auto Crane packs power and precision! With a 15.3 ft reach, 10,000 ft-lb rating, and 62 ft of high-quality cable, it’s built for heavy-duty performance. Pair it with our SBC Service Body for a perfect fit that delivers strength and reliability on every job!
Auto Crane EHC-4-16 Ft
Meet the 4,000 lb Auto Crane! With a 16,000 ft-lb rating, 16 ft reach, and 4.8 hp motor, this crane delivers serious lifting power. Equipped with 80 ft of high-quality aircraft cable, it’s built for heavy-duty performance and precision. Pair it with the nation’s #1 choice—the CM SBC Service Body—for the ultimate work truck combo!
Workbench Tail Shelf Bumper
Complete your SBC Crane Body with our best-in-class workbench tail shelf bumper, built with the rugged materials and safety features crane body users demand in the field.
Brochure
Submit the form below to receive the brochure and learn more about our solutions from CM Truck Beds.
CM Truck Beds News
CM Truck Beds introduces new Gen 2 SB Service Body
KINGSTON, OK (January 11, 2020) — CM Truck Beds is proud to introduce the new Gen 2 SB Service Body. Building on the legacy of its popular SB model, CM pushed the envelope to [...]
New HS Hotshot Body is the Turnkey Solution for Hotshot Drivers
CM has added another innovation to its lineup with the debut of the HS Hotshot. This single-piece steel truck body is designed for ultimate strength and durability. It offers the industry’s best hauling capacity and [...]
CM Introduces Several Innovative New Models for 2020
CM Truck Beds continues its focus on driving the industry forward with the introduction of several innovative new models in 2020. The CR Crane Body, CB Contractor Body and LB Landscape Body enhance the CM [...]
